-Colour Choices-

Gold * Silver * White * Red * Green - Note: Red and Green are difficult to read.

-Supplying Copy for New Stamping Die-

1. Copy whether type, logo design or crest, or any combination must be supplied in black and white only, no gray scales, halftones or multiple colours.
2. Send copy by mail or as an email attachment in an EPS format, we can not use JPG's.
3. Do not send copy by fax as the results are to fuzzy.
4. Upon completion of artwork, we send you a proof for approval
5. Once a stamping die is created it can not be changed. Should your requirements change, a new die will be required.

-Stamping Area-

The maximum width is 2 3/8 inches, the maximum depth is 3 inches.

-Cases that can not be stamped-

LTS-11-C * LTS-8-C * All Cordura Nylon Cases LNCC24-A,B,C,R
All Supported Vinyl Cases LVL26-A,B,C,R

-Costs-

There is a charge for the original stamping die and a stamping charge per carrying case. The carrying cases are extra.
Triform offers a large number of stock and standing dies which may be used without charge, only the stamping charge and cost of cases apply.

Gold Stamping Charges

Minimum order: 3 Carrying Cases

Nylon Cases cannot be gold stamped because of their woven surface.